Recent Submissions

  • Visual SLAM algorithms and their application for AR, mapping, localization and wayfinding

    Theodorou, Charalambos; Velisavljevic, Vladan; Dyo, Vladimir; Nonyelu, Fredi; ; University of Bedfordshire; Briteyellow (Elsevier, 2022-08-03)
    Visual simultaneous localization and mapping (vSLAM) algorithms use device camera to estimate agent’s position and reconstruct structures in an unknown environment. As an essential part of augmented reality (AR) experience, vSLAM enhances the real-world environment through the addition of virtual objects, based on localization (location) and environment structure (mapping). From both technical and historical perspectives, this paper categorizes and summarizes some of the most recent visual SLAM algorithms proposed in research communities, while also discussing their applications in augmented reality, mapping, navigation, and localization.
  • Review of machine learning based fault detection for centrifugal pump induction motors

    Sunal, Cem Ekin; Dyo, Vladimir; Velisavljevic, Vladan; ; University of Bedfordshire (IEEE, 2022-07-01)
    Centrifugal pumps are an integral part of many industrial processes and are used extensively in water supply, sewage, heating and cooling systems. While there are several review papers on machine learning-based fault diagnosis on induction motors, its application to centrifugal pumps has received relatively little attention. This work attempts to summarize and review recent research and development in machine learning-based pump condition monitoring and fault diagnosis. The paper starts with a brief explanation of pump operation including common pump faults and the main principles of the motor current signature analysis (MCSA) method. This is followed by a detailed explanation of various machine learning-based methods including the types of detected faults, experimental details and reported accuracies. The performances of different approaches are then presented systematically in a unified table. Finally, the authors discuss practical aspects and challenges related to data collection, storage and real-world implementation.
  • A review of fuel cell technology for commercial vehicle applications

    Jokela, Tommi; Kim, Bill; Gao, Bo; Wellers, Matthias; Peng, Zhijun (Inderscience, 2021-12-31)
    The demanding energy storage requirements of many commercial vehicle applications are extremely difficult to meet for pure battery electric vehicles (BEVs) due to the limited energy density of batteries. Fuel cells appear to be the only viable propulsion technology that is able to meet commercial vehicle powertrain requirements with zero local greenhouse gas emissions. Since almost all fuel cell vehicles (FCVs) contain a high voltage battery, some additional complexity is introduced since the hybrid energy storage system must be sized and controlled appropriately. An understanding of the strengths and weaknesses of each system is therefore essential in FCV design. The aim of this technology review is to provide an overview of fuel cell technologies in commercial vehicle applications including assessments of alternative powertrain and fuel cell types, advantages and disadvantages of fuel cell and battery systems and the implications of these on the powertrain sizing as well as control considerations of FCVs.
  • Exploring the potential benefits of Ethanol Direct Injection (EDI) timing and pressure on particulate emission characteristics in a Dual-Fuel Spark Ignition (DFSI) engine

    Li, Xiang; Li, Dayou; Liu, Jingyin; Ajmal, Tahmina; Aitouche, Abdel; Mobasheri, Raouf; Rybdylova, Oyuna; Pei, Yiqiang; Peng, Zhijun; ; et al. (Elsevier, 2022-04-26)
    Nowadays, particulate matter emitted by vehicles severely impacts environmental quality and human health. In this paper, the potential benefits of Ethanol Direct Injection (EDI) timing and pressure on particulate emission characteristics in a Dual-Fuel Spark Ignition (DFSI) engine were initially and systematically explored. The experimental results illustrate that by delaying EDI timing from -340 ºCA to -300 ºCA, there is a significant benefit in both particulate number and mass concentration. Furthermore, the size distribution curve of particulate number changes from bimodal to unimodal, meantime size distribution curves of particulate mass consistently concentrate on the accumulation mode. By increasing EDI pressure from 5.5 MPa to 18 MPa, the droplet size of ethanol spray can be effectively reduced. The benefit of increasing EDI pressure is more apparent in reducing particulate number is than particulate mass. The concentration of number and mass for total particulates have a reduction of 51.15% and 22.64%, respectively. In summary, it was demonstrated that an appropriate EDI timing or high EDI pressure could be a practical and efficient way to reduce particulate emissions in a DFSI engine.
  • Cell spreading behaviors on hybrid nanopillar and nanohole arrays

    Wu, Xiaomin; Li, Li; Wang, Lu; Lei, Zecheng; Yang, Fan; Liu, Ri; Wang, Ying; Peng, Kuiqing; Wang, Zuobin; Wu X (IOP Publishing, 2021-11-05)
    Although nanopillars (NPs) provide a promising tool for capturing tumor cells, the effect of mixing NPs with other nanopatterns on cell behavior remains to be further studied. In this paper, a method of fabricating silicon nanoscale topographies by combining laser interference lithography with metal assisted chemical etching was introduced to investigate the behaviors and pseudopodia of A549 cells on the topologies. It was found that cells had a limited manner in spreading with small cell areas on the silicon nanopillar (SiNP) arrays, but a good manner in spreading with large cell areas on the silicon nanohole (SiNH) arrays. When on the hybrid SiNP/SiNH arrays, cells had medium cell areas and they arranged orderly along the boundaries of SiNPs and SiNHs, as well as 80% of cells displayed a preference for SiNPs over SiNHs. Furthermore, the lamellipodia and filopodia are dominant in the hybrid SiNP/SiNH and SiNP arrays, respectively, both of them are dominant in the SiNH arrays. In addition, the atomic force acoustic microscopy was also employed to detect the subsurface features of samples. The results suggest that the hybrid SiNP/SiNH arrays have a targeted trap and elongation effect on cells. The findings provide a promising method in designing hybrid nanostructures for efficient tumor cell traps, as well as regulating the cell behaviors and pseudopodia.
  • Effect of different trypsin concentrations on SMCC-7721 cell adhesion

    Yan, Jin; Tian, Liguo; Xie, Chenchen; Liu, Yan; Lu, Zhengcheng; Wang, Zuobin; Changchun University of Science and Technology; University of Bedfordshire (International Journal of Pharma Medicine and Biological Sciences, 2021-07-03)
    In this work, living human liver cancer cells (SMCC-7721) were exposed to the trypsin solution at the concentrations of 1.5 mg/ml, 2.0 mg/ml, 2.5 mg/ml, 3.0 mg/ml, 3.5 mg/ml and 4.0 mg/ml, respectively. After 2 min of dosing time, the physical and mechanical properties of the cells were detected by Atomic Force Microscope (AFM). With the increase of the trypsin concentration, the adhesion force between the cell and the probe gently decreased. The maximum lateral deflection voltage variation of the probe, which reflected the maximum external force that kept the cells attached to the substrate, was significantly reduced. This work indicates that we may change the cell morphology and regulate the mechanical properties of cells by controlling the concentration of trypsin solution to treat cells, which has important implications for bioengineering and cell manipulation.
  • Laser interference field induced re-distribution of Ag nanoparticle arrays

    Yue, Ming; Liu, Mengnan; Li, Li; Liang, Xiubo; Wang, Lu; Wang, Zuobin; Changchun University of Science and Technology; University of Bedfordshire (IEEE, 2021-11-18)
    The wide application of metal nanoparticle arrays has attracted much attention in the field of nanotechnology. Such as quantum dots, structural colors, sensors, metamaterials. In this work, we fabricated periodic micro-and nanostructures through the interference of two beams with the same frequency and vibration direction. By controlling the spot energy and light field energy distribution of Gaussian interference lithography, the various surface characteristics of Ag-Si material system (Ag@Si) are optimized, and the mass transfer brought by Oswald ripening is used to control the Rayleigh instability in the thermal dewetting process. To achieve the purpose of the periodic gradient Ag nanoparticle arrays (AgNPs) pattern can be controlled. The experimental results show that the periodic micro-and nanostructures can be obtained by optimizing the spot energy and the number of pulses.
  • Fabrication of hierarchical Ti6Al4V structures by hydrothermal treatment and laser interference lithography with enhanced ice resistance

    Liu, Ri; Wu, Xiaoming; Cao, Liang; Liu, Dongdong; Sun, Baishun; Weng, Zhankun; Wang, Zuobin; Changchun University of Science and Technology; University of Bedfordshire (IEEE, 2021-11-18)
    Icing widely exists in aerospace, transportation and electric power communication, causing great safety risks to people's production and life. Inhibiting icing is of great significance in practical engineering applications, and thus, employing an economical and efficient anti-icing method is a research hotspot. In this work, an anti-icing structured surface was fabricated by combining direct laser interference lithography (DLIL) with hydrothermal treatment. A micro-pillar array structure on the tc4 substrate was easily fabricated by DLIL, and a layer of nano-grass structure on the micro-pillar array was grown by hydrothermal treatment. These hierarchically textured surfaces exhibited low-temperature-adaptive water repellency (150° at −10°C, which delayed the frozen time (DT∼1h) and dropped frozen temperature. The above conditions were analyzed from the angle of wettability and heat conduction, and the influence of structure and wettability on ice resistance was discussed.
  • Effect of astragalus polysaccharides on cancer cells studied by AFM

    Lu, Zhengcheng; Wang, Zuobin; Li, Dayou; Zhu, Wenyu; Wang, Rui; Qu, Kaige; Yan, Jin; University of Bedfordshire; Changchun University of Science and Technology (IEEE, 2021-11-18)
    As a traditional Chinese medicine, astragalus and its products are used in cancer treatment aiming to reduce the side effects of chemotherapy. Cells are the most basic unit of living organisms, and AFM directly obtains information from living cells on the micro/nano scale. Therefore, the use of AFM to study the interaction between astragalus and cells is conducive to a full range of drug efficacy evaluation and provides a new way for drug development. In this paper, astragalus polysaccharides were extracted from astragalus, which were diluted into solutions of different concentrations. Combined with the MTT experiment, the effects of Astragalus polysaccharide on cancer cells and benign cells were studied by AFM.
  • A dynamic feedback algorithm of AFM based on cell morphology changes

    Cheng, Can; Wang, Xinyue; Dong, Jianjun; Liu, Zimin; Wang, Zuobin; Changchun University of Science and Technology; University of Bedfordshire (IEEE, 2021-11-18)
    The atomic force microscope (AFM) used in biological research as a powerful tool has been for many years. However, the imaging of living cells is still a problem as the sample is too high and too soft to obtain their accurate morphologies. Especially in the high-speed scanning mode, AFM does not have enough judgments to make accurate measurements at the down part of the sample. In this study, we propose an improved control method to improve the image quality of living human colon cancer cells (SW480) especially in the down part during the scanning.
  • Analysis of the mechanical properties of chromosomes in air and liquid by AFM

    Wang, Bowei; Yang, Fan; Dong, Jianjun; Li, Jiani; Wang, Ying; Qu, Kaige; Wei, Huimiao; Wang, Zuobin; Changchun University of Science and Technology; Changli Nano Biotechnology Ltd; et al. (IEEE, 2021-11-18)
    Chromosomes contain all the genomic information thus making the study of chromosomes practical and significant. Herein, the morphologies of chromosomes prepared with different methods were monitored by atomic force microscopy (AFM). Moreover, the mechanical properties of chromosomes in air and liquid were investigated quantitatively through AFM-based force spectroscopy. The differences of chromosome morphologies and mechanical properties caused by sample preparations indicated that the chromosome characterization in liquid was more meaningful to reveal the physiological characteristics of chromosomes.
  • Study on the conductivity of DNA molecules under magnetic fields

    Gao, Mingyan; Hu, Jing; Wang, Jianfei; Liu, Mengnan; Zhu, Xiaona; Tian, Liguo; Hu, Cuihua; Song, Zhengxun; Xu, Hongmei; Wang, Zuobin; et al. (IEEE, 2021-11-18)
    In this work, the conductivity of DNA molecules under the effect of magnetic fields was studied by conductive atomic force microscopy (C-AFM). It is found that the self-assembly images of 7.5 ng/μL DNA aqueous solution on the bare mica and Au layer surfaces are quite different, and the DNA molecules are obviously stretched on the Au layer surface and single stretched DNA strands were obtained. In addition, the conductivity of single stretched DNA molecules in the horizontal stable magnetic field (SMF) and high frequency electromagnetic field (HFEF) were investigated in detail. The results showed that the conductivity of DNA was weakened by the effect of magnetic field.
  • Effect of SMMC-7721-derived exosomes on hepatocytes studied by AFM

    Ju, Tuoyu; Yang, Fan; Wang, Ying; Song, Zhengxun; Xu, Hongmei; Chen, Yujuan; Wang, Zuobin; Changchun University of Science and Technology; University of Bedfordshire (IEEE, 2021-11-18)
    Exosomes play an important role in the early diagnosis and development of hepatocellular carcinoma (HCC). In the past, researchers mainly studied the contents of exosomes and the biological mechanism on cells, but the changes of mechanical properties of cells caused by exosomes are not clear. In this study, the changes of mechanical properties of hepatocytes (L-02) co-cultured with exosomes (7721-exos) derived from HCC (SMMC-7721) with low metastatic ability were studied. The 7721-exos were able to promote the proliferation and rearrange the cytoskeleton of L-02 cells. The atomic force microscopy measurement results showed that the height was increased, the adhesion and the elastic modulus were reduced. The effect was concentration dependent. The changes of cell mechanical properties induced by exosomes were of great significance for further studying the mechanism of exosomes.
  • Tapping atomic force microscopy imaging at phase resonance

    Sun, Baishun; Xie, Chenchen; Qu, Kaige; Cao, Liang; Yan, Jin; Wang, Ying; Tian, Liguo; Zhang, Wenxiao; Wang, Zuobin; Changchun University of Science and Technology; et al. (IEEE, 2021-11-18)
    Tapping atomic force microscope (TM-AFM) can measure soft samples, which has the advantages of low loss and high resolution, and has been widely used in the characterization of soft micro-nano materials by atomic force microscope (AFM). The phase image in TM-AFM contains sample properties, and it is an important method to characterize the sample by TM-AFM. At present, researchers usually select the frequency near the first resonance peak of the probe to drive its vibration to carry out scanning imaging. However, the phase sensitivity near the first-order resonance of the probe is not high. Therefore, the phase image of TM-AFM is also less sensitive to characterize micro-nano materials. In order to improve the phase sensitivity of the probe, the probe working at the phase resonance peak was selected in this paper to improve the phase sensitivity of the probe vibration and the imaging quality of TM-AFM phase image. The experimental results show that the phase image of phase resonance-atomic force microscope (PR-AFM) can provide not only the surface information but also the structure information of the sample subsurface. PR-AFM can be applied for better characterization of micro and nano materials.
  • Growth behavior of SHSY5Y cells on hybrid micro-pit and nano-pillar arrays

    Wu, Xiaomin; Li, Li; Liu, Ri; Weng, Zhankun; Wang, Zuobin; Changchun University of Science and Technology; University of Bedfordshire (IEEE, 2021-11-18)
    The directional arrangement and extension of cells is of great significance in the tissue engineering field. Great efforts have been made to study the effects of micro- or nano- structures on cell behaviors, but they are still poorly understood. In this work, hybrid micro/nano structures prepared by combining laser marking technology with metal assisted chemical etching (MACE) were introduced to study their effect on the growth behavior of SHSY5Y cells. It was found that the cells on the silicon micro-pit arrays (SiMP arrays, unetched substrate) were arranged orderly along the edge of the micro-pits, stretched and connected with each other, while the cells on the hybrid silicon micro-pit and silicon nano-pillar arrays (hybrid SiMP/SiNP arrays, etched substrates) were also arranged in an orderly manner with a relatively short cell stretch, but displayed a preference for independent growth. In addition, about 90% of cells showed a preference for growing on the area of nano-pillars (NPs), and only 10% of cells on the area of micro-pits (MPs) on the etched substrate. The results showed that the hybrid SiMP/SiNP arrays trapped cells and restricted the cell spreading. Thus, this approach is of great significance for the study of independent growth behavior of cells on the substrate in the field of single neuron research.
  • Multi-parameter AFM characterization of INS-1 cells

    Yang, Fan; Wang, Bowei; Wang, Jiajia; Chen, Yujuan; Wang, Zuobin; Changchun University of Science and Technology; University of Bedfordshire (IEEE, 2021-11-18)
    AFM-based single cell force spectroscopy has been employed wildly, while more work is needed for the mechanical detection of diabetes-related cells (INS-1 cells). In this study, a multi-parameter AFM characterization was performed to detect the mechanical properties of INS-1 cells in situ. High resolution topographies and concurrent mechanics were obtained by taking the advantage of the quantitatively imaging (QI) mode AFM. The analyses of force curves and force maps jointly presented the multiple parameters involved in the cell mechanics. The AFM force spectroscopy measurement provides full analysis and comprehensive understanding of cell mechanics.
  • Self-assembly of DNA molecules in magnetic fields

    Gao, Mingyan; Hu, Jing; Wang, Jianfei; Liu, Mengnan; Zhu, Xiaona; Saeed, Sadaf; Hu, Cuihua; Song, Zhengxun; Xu, Hongmei; Wang, Zuobin; et al. (IOP Publishing, 2021-11-18)
    In this work, a rich variety of self-assembled DNA patterns were obtained in the magnetic field. Herein, atomic force microscopy (AFM) was utilized to investigate the effects of the concentration of DNA solution, intensity and direction of magnetic field and modification of mica surface by different cations on the self-assembly of DNA molecules. It was found that owning to the change of the DNA concentration, even under the same magnetic field, the DNA self-assembly results were different. The in situ test results showed that the DNA self-assembly in an magnetic field was more likely to occur in liquid phase than in gas phase. In addition, whether in a horizontal or vertical magnetic field, a single stretched dsDNA was obtained in a certain DNA concentration and magnetic field intensity. Besides, the modification of cations on the mica surface significantly increased the force between the DNA molecules and mica surface, and further changed the self-assembly of DNA molecules under the action of magnetic field.
  • Electrical conductivity measurement of λ DNA molecules by conductive atomic force microscopy

    Wang, Ying; Xie, Ying; Gao, Mingyan; Zhang, Wenxiao; Liu, Lanjiao; Qu, Yingmin; Wang, Jiajia; Hu, Cuihua; Song, Zhengxun; Wang, Zuobin; et al. (IOP Publishing, 2021-11-08)
    Conductive atomic force microscopy (C-AFM) is a powerful tool used in the microelectronics analysis by applying a certain bias voltage between the conducting probe and the sample and obtaining the electrical information of sample. In this work, the surface morphological information and current images of the lambda DNA (λ DNA) molecules with different distributions were obtained by C-AFM. The 1 and 10 ng μl−1 DNA solutions were dripped onto mica sheets for making randomly distributed DNA and DNA network samples, and another 1 ng μl−1 DNA sample was placed in a DC electric field with a voltage of 2 V before being dried for stretching the DNA sample. The results show that the current flowing through DNA networks was significantly higher than the stretched and random distribution of DNA in the experiment. The I–V curve of DNA networks was obtained by changing the bias voltage of C-AFM from −9 to 9 V. The currents flowing through stretched DNA at different pH values were studied. When the pH was 7, the current was the smallest, and the current was gradually increased as the solution became acidic or alkaline.
  • Experimental and numerical investigations into temperature distributions and VOC conversion rate of RTO

    Liu, Jingyin; Peng, Zhijun; Nantong University; University of Lincoln; University of Bedfordshire (IOP Publishing Ltd, 2022-01-07)
    As regulations for controlling VOCs (Volatile Organic Compounds) emissions have become more and more stringent, RTO (Regenerative Thermal Oxidizer) which involves heat exchange and storage, combustion and reaction processes has to be further optimised for enhancing the VOC treatment efficiency and reducing energy consumption. In this paper, influences of operating temperature distributions and internal flow fields on gas-out VOC concentration have been studied with experimental investigation and CFD numerical simulation. Experimental results shows that combustion temperature (around the combustor) plays more critical role than thermal storage bed temperature for affecting VOC flow-out concentration. By examining the internal flow and temperature distributions, modelling results demonstrate that fast heat transfer takes place in thermal ceramic beds and high temperature areas are formed around the combustor. At about 20 seconds after a bed working for gas-in flow, the heat transfer has demonstrated obvious attenuating. The research suggests that it is very challenging for simultaneously maintaining low gas-out VOC concentration and keeping low fuel consumption and low combustion temperature in RTOs.
  • Comparative study on the macroscopic characteristics of gasoline and ethanol spray from a GDI injector under injection pressures of 10 and 60 MPa

    Li, Xiang; Li, Dayou; Liu, Jingyin; Ajmal, Tahmina; Aitouche, Abdel; Mobasheri, Raouf; Rybdylova, Oyuna; Pei, Yiqiang; Peng, Zhijun (ACS, 2022-03-04)
    To reduce particulate matter (PM) emissions from vehicles powered by gasoline direct injection (GDI) engines, increasing the fuel injection pressure has been one promising approach. However, a comparison of macroscopic characteristics between gasoline and ethanol from a GDI injector under an ultrahigh injection pressure of more than 50 MPa has not been reported. The experimental study presented in this paper can provide some new and valuable information about comparing and analyzing the macroscopic characteristics of gasoline and ethanol spray from a GDI injector in both front and side views under injection pressures of 10 and 60 MPa. The experimental results show that compared to ethanol, gasoline spray has a slight advantage in LS (penetration of whole spray), LC (penetration of core region of spray), θS (spray cone angle), and RI (irregularity of spray boundary) under both PI (injection pressure) = 10 MPa and PI = 60 MPa, which would promote a more homogeneous mixture of air and fuel. Furthermore, the advantage of gasoline in θS is more pronounced under PI = 60 MPa. At the end of injection, SS (area of whole spray) of gasoline is around 2% larger than ethanol, while its advantage in SC (area of core region of spray) can be around 5%. With the increase of PI from 10 to 60 MPa, a marked increase of RS (the ratio of SC to SS) and RI indicates that atomization and air–fuel mixture homogeneity can be significantly improved for both gasoline and ethanol spray. Besides, a minor revision to the Dent model helps achieve a significant improvement in the prediction accuracy of LS for both gasoline and ethanol spray under injection pressures of 10 and 60 MPa.

View more